
Calibrate GTA VI aiming with two simple camera turns
Measure comfort separately for a quick turn and a small correction.
Set a wide turn first
Once you reach a quiet place after release, pick two landmarks roughly a quarter-turn apart. Try moving smoothly between them at the default setting. Use the same controller and camera mode for a repeat. Change only sensitivity if the turn repeatedly feels too slow or slides beyond the second landmark.
Check the fine motion afterward
Use two points a few degrees apart to see whether the new setting makes a small correction harder. If the game separates aim sensitivity from camera sensitivity, tune them in that order. Write down the final settings and repeat both turns after a break to make sure the result still feels natural.
Look for a change you can feel twice
On PS5, PlayStation has confirmed adjustable DualSense effects. Try those independently of camera speed, since added trigger resistance can change how the same aim setting feels. Use an ordinary low-pressure place in the game. When you test a small correction, begin with your usual grip and make one deliberate input rather than repeatedly nudging the stick.
Try your final setup in a different view
After the foot test, turn the camera from a stationary vehicle if you use that view often. A setup that feels slow during a chase may still work well for fine corrections on foot. The most helpful notes identify whether you changed regular camera movement, aim movement or controller feedback. This lets you reverse the one option causing trouble.